BSXJW - PYRROLIDINECARBODITHIOIC ACID AMMONIUM SALT, 09935
- MSDS: BSXJW
- Manufacturer: SIGMA ALDRICH CORP
- Product Name: PYRROLIDINECARBODITHIOIC ACID AMMONIUM SALT, 09935
- National Stock Number: 6810-00N036022
Product Identification
Product ID:PYRROLIDINECARBODITHIOIC ACID AMMONIUM SALT, 09935
MSDS Date:01/01/1993
FSC:6810
NIIN:00N036022
MSDS Number: BSXJW
Responsible Party
MILWAUKEE, WI 53233
US
Emergency Phone: 800-325-5832;800-231-8327
Info Phone: 314-771-5765;414-273-3850
Cage: GO059
Contractor
Telephone: 800-231-8327
Cage: GO059
Ingredients
PYRROLIDINECARBODITHIOIC ACID AMMONIUM SALT
CAS: 5108-96-3
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION, OR SKIN ABSORPTION. CAUSES EYE, SKIN AND RESPIRATORY
SYSTEM IRRITATION. MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND
UPPER RESPIRATORY TRACT. TO THE BEST OF MFR'S KNOWLEDGE, THE
CHEMICAL, PHYSICALAND TOXICOLOGICAL PROPERTIES HAVE NOT BEEN
THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:IMMED FLUSH EYES W/COPIOUS AMTS OF WATER FOR @ LST 15
MIN. SKIN: IMMED FLUSH SKIN W/SOAP & COPIOUS AMTS OF WATER. INHAL:
REMOVE TO FRESH AIR. IF NOT BRTHG GIVE ARTF RESP. IF BREATHING IS
DIFFICULT , GIVE OXYGEN. INGEST: WASH OUT MOUTH W/WATER PROVIDED
PERSON IS CONSCIOUS. CALL MD. WASH CONTAM CLTHG BEFORE REUSE.
Fire Fighting
Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS
AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR
WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND WASH SPILL
SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:IRRITANT. KEEP TIGHTLY CLOSED. HANDLE
AND STORE UNDER NITROGEN. REFRIGERATE. AIR SENSITIVE.
Other Precautions:DO NOT BREATHE DUST. DO NOT GET IN EYES, ON SKIN, ON
CLTHG. AVOID PRLNGD/RPTD EXPOSURE. IRRIT TO EYES, RESP SYS & SKIN.
IN CASE OF CNTCT W/EYES, RINSE IMMED W/PLENTY OF WATER & SEEK MED
ADVICE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. WEAR SUITABLE
PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>307F,>153C
Appearance and Odor:WHITE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDING AGENTS, STRONG BASES, STRONG ACIDS.
Stability Condition to Avoid:SENSITIVE TO AIR.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES, SULFUR OXIDES.
Disposal
Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL
LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.